Icubed_web_page

logo
This is one of i-cubed's range of
high-performance Ethernet cards for Acorn
RiscOS computers. Contact or
for more information.
logo

Products
Ethernet Adapter Card
for Acorn Computers Ltd.A3000 series computers.


EtherLan 102


10BaseT and 10Base2 Combination Ethernet adapter cards for A3000. Also suitable for use in podule slot of A3010, A3020 and A4000 series computers.

256Kbyte of FLASH ROM (upgradeable to 512Kbytes) allows user to upgrade or change network protocols without having to purchaes and replace physical components. Avoids potential exposure to hazardous voltages in power supplies.
EtherLan 102 offers automatic selection of either 10Base2 (Thin Ethernet) or 10BaseT (Twisted Pair). Allows user to move to different cabling structures in the future.
Stainless steel backpanel for superior bypass circuit performance.
IEEE802.3 compliant line interfaces. Voltage isolation to 500V (10Base2) and 2000V (10BaseT).
i3 is commited to the highest possible degree of 'future-proofing' in network insallations. This includes the use of Category 5 cabling and fiber optic links (both of which will support 100Mbit Ethernet and 155Mbit ATM) to facilitate migration to higher-performance technologies as they become affordable Please for free network planning advice.
Designed and Manufactured in the UK by:
i-cubed limited,
Rustat House,
62 Clifton Road,
Cambridge.
CB1 4GY
Tel:
Fax:
E-mail:
Ordering Code:
Combo
10Base2 & 10BaseT
(BNC & RJ45) Network
E102 E102/A+ E102/C E102/T
(Special order only)
Data Rate 10M bits/s 10M bits/s 10M bits/s 10M bits/s
Computer interface 8 bits 8 bits 8 bits 8 bits
Supported Protocols* AUN,
LAN Manager**,
TCP/IP,
Windows for
Windows**,
Windows '95**.
As E102 plus
Acorn
Access+.
As E102 plus
ClassShare
Client.
AS E102 plus
TCP/IP
BootP &
TFTP.
Buffer Size 32Kbyte 32Kbyte 32Kbyte 32Kbyte
Driver Software*** DCI4 DCI4 DCI4 DCI2
FLASH ROM size(1) 256Kbytes 256Kbytes 256Kbytes 256Kbytes
Electromagnetic Compatibility (EMC) To EN55022
Network Compatability fully IEEE802.3 compliant.
Operation Range 100m to 10BaseT repeater, 185m to any 10Base2 repeater, bridge or gateway.
* Protocols may be changed after installation. Please for further information.
** Via Third Party Application software such as OmniClient.
*** The DC14 Software driver is required in order to use OmniClient, Access+ and Intertalk. A DCI 2 FLASH ROM conversion disc is available from i3 approved Preferred Dealer for use with older, unsupported protocols.
(1) Add/4 to ordering code for 512Kbytes FLASH ROM eg. E102/A+/4

Copyright 1995-97 Doc V2
[Home] [Products] [Support] [Links] [Sitemap]
This website is closed
disclaimer